Ruthenium–iridium, iridium–tantalum and platinised layers, coated in Xinxiang. Mesh, plate, tubular, rod — and the pool cells built from them.
Seven solid plates, 1.0 mm thick, 4.0 mm apart. Bright, cold and electrochemically idle. Nothing here has worn out — the plate has simply not been coated yet.
The few microns on the surface are what turn a piece of titanium into an anode. On an RP cell the layer goes onto every plate and onto both faces, because every plate takes its turn as the anode.
The titanium is the substrate. The dark satin surface is the product — and it is the part a cheaper supplier can quietly put on thinner. So the line on a quotation worth arguing about is the coating load.
Titanium electrodes, MMO and DSA anodes — coated in Xinxiang and sold into copper-foil lines, plating shops, electrowinning and water treatment. The pool cell and the hypochlorite generator are what we build from them.
Mixed metal oxide. The coating on the RP and AC pool cells and on the hypochlorite generators.
High oxygen-evolution potential, holds up in acid. Used through the manufacture of electrolytic copper and aluminium foil.
A platinum layer rather than an oxide. Horizontal plating, pulse plating and precious-metal electroplating.
Also in the range: electrowinning and electro-refining anodes for high-current-density copper foil and for the extraction of platinum, gold, silver and cobalt · chlorine dioxide cells · titanium anodizing.
Best seller · built from our own anodes
Two series, five sizes each. They are not the same cell with a different controller — the plate packs are built differently.
Reverse polarity · self-cleaningRP
Every plate is coated on both faces, because every plate takes its turn as the anode. The cell sheds its own scale. No acid washing.
Monopolar · periodic acid washAC
Coated anodes, bare titanium cathodes. Polarity never reverses, so scale builds up: plan on a periodic acid wash, 1 part HCl to 15 parts water.
RP — all seven plates coated, both faces
AC — coated anodes alternating with bare titanium cathodes
| Model | Chlorine output | DC current | Pool, hot | Pool, cool |
|---|---|---|---|---|
| RP-10 / AC-10 | 10 g/h | 10 A | 20 m³ | 40 m³ |
| RP-15 / AC-15 | 15 g/h | 15 A | 35 m³ | 60 m³ |
| RP-20 / AC-20 | 20 g/h | 20 A | 45 m³ | 80 m³ |
| RP-25 / AC-25 | 25 g/h | 25 A | 65 m³ | 120 m³ |
| RP-35 / AC-35 | 35 g/h | 35 A | 120 m³ | 180 m³ |
Every model: 5–7 V DC · 150–450 L/min · 3,500–7,000 ppm salinity · max working pressure 250 kPa · inlet/outlet inside diameter 50 mm · transparent housing · rated life ≥10,000 h · power supply not included.
Input power, the plate pack in section, and the two series side by side →
Industrial anodes & OEM
On ruthenium–iridium anodes: the substrate can be used repeatedly without excessive loss, which saves the cost for users.
Send a drawing, or the dimensions and the duty.
Main parts replaced under warranty, free quick-wear parts, 24-hour online service; on large orders we can send an engineer to your site. Exported to the United States, Australia, Russia, Britain, the Czech Republic, Spain, Germany, Japan, Holland, Poland, Turkey, Oman, the Philippines and others.
Send the model number on the old one — a photo of the label is faster than a description.
Copper foil, plating, electrowinning, water treatment: tell us the duty, the geometry and the volumes.
